USB3310
PRODUCT FEATURES | Data Brief |
Interface compliant with the ULPI Specification revision 1.1 as a Single Data Rate (SDR) PHY
1.8V IO Voltage (±10%)flexPWRTM Technology—Low current design ideal for battery powered applications
—“Sleep” mode
Includes full support for the optional
Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
Allows host to turn VBUS off to conserve battery power in OTG applicationsSupport OTG monitoring of VBUS levels with internal comparators—Low Latency
Internal 5V cable
—0 to 3.6V input drive tolerant
—Able to accept “noisy” clock sources
Internal low jitter PLL for 480MHz—2.2uF bypass capacitor
—100mV dropout voltage
—Up to ±15kV without any external devices
Carkit UART mode for—24 pin QFN
Applications
The USB3310 is targeted for any application where a Hi- Speed USB connection is desired and when board space, power, and interface pins must be minimized.
The USB3310 is well suited for:Cell PhonesPDAsMP3 PlayersGPS Personal NavigationScannersExternal Hard DrivesDigital Still and Video CamerasPortable Media PlayersEntertainment DevicesPrintersSet Top BoxesVideo Record/Playback SystemsIP and Video PhonesGaming ConsolesPOS TerminalsSMSC USB3310 REV C | PRODUCT PREVIEW |
Revision 1.11