Snapper 020229 owner manual Severe burns can occur on contact, PSI Pressure Washer

Models: 020229

1 32
Download 32 pages 11.43 Kb
Page 4
Image 4
Severe burns can occur on contact.

2450 PSI Pressure Washer

Combustible debris, such as leaves, grass, brush, etc. can catch fire. WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

DO NOT touch hot surfaces.

Allow equipment to cool before touching.

The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

Unintentional sparking can result in fire or electric shock. WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

Tie up long hair and remove jewelry.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER WARNING

High pressure spray can cause paint chips or other particles to become airborne.

Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

High pressure spray may damage fragile items including glass. WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

Manual background CAUTION

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

DO NOT tamper with governed speed.

DO NOT operate pressure washer above rated pressure.

Manual background CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

DO NOT secure spray gun in open position.

DO NOT leave spray gun unattended while machine is running.

NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

Always be certain spray gun, nozzles and accessories are correctly attached.

CAUTION

High pressure spray may damage fragile items including glass.

DO NOT point spray gun at glass when in jet spray mode.

NEVER aim spray gun at plants.

CAUTION

Improper treatment of pressure washer can damage it and shorten its life.

If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

NEVER operate units with broken or missing parts, or without protective housing or covers.

DO NOT by–pass any safety device on this machine.

Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer.

This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

4

Page 4
Image 4
Snapper 020229 Severe burns can occur on contact, Combustible debris, such as leaves, grass, brush, etc. can catch fire