Snapper 155223 important safety instructions Maintenance, and SERVICE PARTS

Section 3 - MAINTENANCE

3.4ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in the maintenance schedule.

3.4.1.Engine

Refer to engine owner's manual for service instructions.

3.4.2. Spark Plug

Refer to engine owner's manual for service instructions.

3.5STORAGE PROCEDURE

Refer to the Engine Owner's Manual for directions regarding engine storage preparations. Prepare the snow thrower for "end of season" storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt snow thrower up on its wheels and thoroughly clean the underside of the auger.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Store the machine in a shed or other dry area, protected from weather.

3.6MAINTENANCE and SERVICE PARTS

			MAINTENANCE		and SERVICE PARTS
Auger	Drive		Belt (Tecumseh	Engines)		1-5152
Wheel	Drive		Belt (4 HP & 5 HP Engines)			1-5151
Wheel	Drive Belt (5.5 HP Engines)					4-5214
Wheel	Drive		Belt (6 HP & 7 HP Engines)			2-3416
Scraper Blade (22" Width Auger)						3-3298
Scraper Blade (24" Width Auger)						3-6163
Rubber Drive Tire						2-3364
Shear Bolts - 1/4-20 x 1-1/2"						1-5257
Hex Nuts - 1/4-20						7-6978
Parts	Manual for Intermediate			Frame Snow Thrower - Series 3		#06045
Domestic		Models: 14223, 15223, 155223, 16223, 17243,
European		Models: EI5223,EI55223,			EI7243

11