Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any adjustments, maintenance, service, or repairs, with engine running. Stop auger. Stop engine. Remove key. Disconnect spark plug wire and secure wire away from spark plug. Before tilting machine, drain all the fuel from fuel tank. Allow engine to run, outdoors where fumes can be

safely dissipated, until all fuel is removed from carburetor.

4.1.4. WHEEL DRIVE BELT REPLACEMENT Inspect belt frequently for signs of excessive wear. Visually check engine drive belt for cracking, fraying, severed or belt strands exposed.

1.Remove belt cover. Refer to Figure 4.2.

2.Remove discharge chute.

3.Loosen belt guide closest to the auger drive belt. See Figure 4.6.

IMPORTANT: Wheel drive belt will have to be removed from around engine drive pulley and engine shaft to install auger drive belt.

1.Remove wheel drive belt from around engine pulley. See Figure 4.6.

5.Tilt machine forward to gain access to drive system area. Secure machine in the tilted position to prevent tipping over. Remove drive system cover plate. See Figure 4.7.

REMOVE DRIVE

SYSTEM COVER

FIGURE 4.7

 

AUGER

DRIVE BELT

 

6. Remove wheel drive belt from drive disc pulley.

 

 

Route wheel belt

through drive

system

in between

 

!

 

 

rubber drive tire and drive disc.

 

 

 

 

 

7. Route new wheel drive belt through drive

LOOSEN

 

 

 

I

 

 

system.

NOTE:

New belt has

to be

routed in

BELT

 

 

/

w2t¢,o,,,vo

 

 

 

 

GUIDE

 

 

 

 

 

 

 

 

between rubber drive tire and drive disc to position

 

 

 

 

it around

auger pulley.

 

 

 

 

 

 

8. Reinstall wheel drive belt onto engine wheel drive

 

 

 

 

pulley. Make sure belt is also positioned in the drive

 

 

 

 

disc pulley groove.

 

 

 

 

 

 

 

9. Position belt guide to have a clearance of 118"

 

 

 

 

from auger drive belt and tighten securely.

 

 

 

 

 

10. Reinstall discharge chute, belt cover and drive

 

 

 

o.,v.,,..

 

 

 

 

system cover Tighten screws securely

 

 

 

 

 

11. Adjust idler for proper belt tension and control

 

 

 

 

cable for proper spring extension. Refer to Section

 

/

 

PULLEY

"Auger Belt Idler Pulley Adjustment".

 

 

 

 

 

 

 

 

 

FIGURE 4.6

14

Page 34
Image 34
Snapper 155223 important safety instructions W2t¢,o,,,vo

155223 specifications

The Snapper 155223 is a highly regarded machine in the realm of outdoor power equipment, particularly recognized for its robust performance and innovative features. Designed for homeowners seeking an efficient lawn mowing solution, the Snapper 155223 combines power, durability, and user-friendly functionality.

One of the standout features of the Snapper 155223 is its 22-inch steel mowing deck. This deck provides a wide cutting area, allowing users to cover larger sections of lawn in less time. The durable steel construction ensures longevity, resisting the wear and tear that often comes from regular use. Additionally, the mowing deck is designed for a clean and precise cut, promoting healthy grass growth.

The Snapper 155223 is powered by a reliable Briggs & Stratton engine, specifically engineered to deliver consistent power and performance. This 190cc engine not only offers ample horsepower but also integrates fuel-efficient technology, making it an economical choice for lawn care. The engine's easy-start feature simplifies the startup process, allowing users to get to work quickly.

Tech-savvy advancements are evident in the Snapper 155223 as well. It features a variable speed self-propelled drive system that allows users to adjust the pace of the mower according to their comfort and the terrain's conditions. This adaptability is particularly beneficial when maneuvering around obstacles or tackling uneven ground.

The Snapper 155223 also emphasizes user comfort and convenience. Its ergonomic handle design minimizes fatigue during extended use, while the adjustable cutting height provides flexibility for different grass types and seasonal growth conditions. Users can select from multiple height settings to achieve the perfect cut.

Furthermore, maintenance is made easy with the Snapper 155223. The mower includes a rear discharge option and is compatible with mulching capabilities, allowing users the flexibility to choose how they want to manage grass clippings. The integrated washout port simplifies cleaning the mowing deck, enhancing the overall maintenance experience.

In summary, the Snapper 155223 stands out as a versatile and durable lawn mower, packed with features that cater to the needs of the modern homeowner. Its powerful engine, robust cutting deck, and user-friendly technologies make it an excellent choice for anyone looking to maintain a beautiful lawn efficiently and effectively.