Install Lift Rod
1.Insert the end of the rod guide (A, Figure 11) through hole in upright of lift arm (B), and secure with spring clip (C).
NOTE: The rod guide (A, Figure 11) should be installed in the lower hole for hydraulic lift applications. For manu- al lift applications, the rod guide may be installed in either hole. The upper hole provides reduced lift effort; the lower hole provides increased lift height.
2.Connect the rear of the lift lever (A, Figure 12) to the lift arm extension (B) using a hair pin clip (C).
3.Adjust lift rod. Different types of terrain may require an adjustment to the lift rod assembly. For instruc- tions on how to make this adjustment refer to the “Lift Rod Adjustment” procedure in the ADJUSTMENTS section of this manual.
Initial Setup & Assembly
C |
B |
A |
Figure 11. Lift Rod Assembly
A.Rod Guide
B.Push Bar Lift Arm
C.Spring Clip
B | C | A |
|
|
Figure 12. Install Lift Rod
A.Lift Rod
B.Lift Arm Extension
C.Hair Pin Clip
11