Snapper 1723445-02, 1694147 manual Removing & Attaching the Hitch & Blade, Removal & Installation

Removing & Attaching

the Hitch & Blade

A

B

B

C

D

E

E

B

Figure 15. Dozer Removal
A. Support Arm	C. Pivot Pin	E. Hitch Pin & Safety Clip
B. Hair Pin Clip	D. Hair Pin Clip & Washer	F. Pivot Hitch

REMOVAL & INSTALLATION

Removing & Attaching Dozer Blade

1.Lower the blade. Position the lift so that it is not lifting the blade or applying downward pressure.

2.Remove the hair pin clip and washer (D, Figure 16) securing the angling control rod to the clevis. Disconnect the angling control rod.

3.Remove the angling control rod from the support arm (A).

4.Remove the pivot pin (C) connecting the blade and pivot hitch. Remove the blade.

5.Lower the lift and remove the clip (B) securing the lift rod to the push bar and lift rod.

6.Remove the hitch pin and safety clip (E) securing the pivot hitch (F) to the sub-frame hitch. Remove the pivot hitch.

7.Remove the sub-frame hitch (refer to sub-frame hitch instructions.

8.Reinstall all pins for storage.

Install in reverse order of removal.

13