Snapper 2300 PSI Pressure Washer
3
DO NOT touch hot surfaces.
Allow equipment to cool before touching.
Running engines produce heat.Temperature of
muffler and nearby areas can reach or exceed
150°F (65°C).
Severe burns can occur on contact.
WARNING
WHEN ADDING FUEL
Turn pressure washer OFF and let it cool at least 2 minutes
before removing gas cap.
Fill fuel tank outdoors.
DO NOT overfill tank.Allow space for fuel expansion.
Keep fuel away from sparks,open flames, pilot lights,heat, and
other ignition sources.
DO NOT light a cigarette or smoke.
WHEN OPERATINGEQUIPMENT
DO NOT tip engine or equipment at angle which causes fuel
to spill.
DO NOT spray flammable liquids.
WHEN TRANSPORTINGOR REPAIRING EQUIPMENT
Transport/repair with fuel tank EMPTY or with fuel shutoff
valve OFF.
WHEN STORINGFUEL OR EQUIPMENT WITH FUEL
IN TANK
Store away from furnaces,stoves, water heaters,clothes
dryers or other appliances that have pilot light or other
ignition source because they can ignite fuel vapors.
Fuel and its vapors are extremely flammable and
explosive.
Fire or explosion can cause severe burns or
death.
WARNING
NEVER aim the spray gun at people,animals or plants.
DO NOT allow CHILDREN to operate the pressure washer.
NEVER repair high pressure hose.Replace it.
The high pressure stream of water that this
equipment produces can pierce skin and its
underlying tissues,leading to serious injur y and
possible amputation.
WARNING
DO NOT tamper with governed speed.
DO NOT operate the pressure washer above the rated
pressure.
Excessively high or low operating speeds increase risk
of injury and damage to pressure washer.
CAUTION
DO NOT wear loose clothing,jewelry or anything that may
be caught in the starter or other rotating parts.
Tie up long hair and remove jewelry.
Starter and other rotating parts can entangle
hands, hair,clothing, or accessories.
WARNING
WHEN ADJUSTING OR MAKING REPAIRS TO YOUR
PRESSURE WASHER
Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
Unintentional sparking can result in fire or
electric shock.
WARNING
Always wear eye protection when you use this equipment or
when you are in the vicinity where the equipment is in use.
High pressure spray can cause paint chips or
other particles to become airborne.
WARNING
DO NOT point spray gun at glass when in the jet spray mode.
NEVER aim the spray gun at plants.
High pressure spray may damage fragile items including
glass.
CAUTION