Belt Replacement

To avoid damaging belts, DO NOT PRY

BELTS OVER PULLEYS.

RIDER DRIVE BELT

Replacement of the rider drive belt requires removal of the transmission and carrier frame. Should the drive belt ever fail, contact your dealer for replacement.

MOWER BELT - 30”

See Figure 31.

1.Mower does not need to be removed to install a new belt. However, for easier access, mower can be removed following steps in “Mower Removal and Installation.

2.If mower is not removed, place mower in lowest cut- ting position. Pull idler pulley arm (A) towards you to relieve belt tension. Remove belt from idler pulley (B) and center arbor pulley (C).

3.Remove belt from front idler pulley (D) and PTO pul- ley (E).

4.Replace old belt with new belt. Make sure V-side of belt runs in all pulley grooves except for idler pulley

(B). Check belt pattern as shown.

5.Install mower if it was removed, and install belt on PTO pulley (E).

MOWER BELT - 34”

See Figure 32.

1.Mower does not need to be removed to install a new belt. However, for easier access, mower can be removed following steps in “Mower Removal and Installation.

2.If mower is not removed, place mower in lowest cut- ting position. Push idler pulley arm (A, Figure 32) away from you to relieve belt tension. Remove belt from idler pulley (B) and PTO pulley (C).

3.Remove the three capscrews (D, Figure 31) securing the left-hand arbor cover.

4.Remove old belt from arbor pulleys and replace with new belt. Make sure V-side of belt runs in all arbor pulley grooves and flat side of belt runs against idler pulley. See Figure 33 for belt pattern

5.Install mower if it was removed, and install belt to PTO pulley (C, Figure 32). Push idler arm and install belt around idler pulley.

*2391

Figure 31 Belt Pattern - 30” Mower

A. Idler Pulley Arm

D. Front Idler Pulley

B. Idler Pulley

E. PTO Pulley

C. Center Arbor Pulley

(Electric Clutch)

 

 

 

 

Figure 32. Mower Belt Replacement - 34”

A. Idler Pulley Arm

D. Capscrews

B. Idler Pulley

E. Arbor Cover

C. PTO Pulley

 

 

 

 

 

Figure 33. Belt Pattern - 34” Mower

A. Idler Arm Pulley

D. Right Arbor Pulley

B. Idler Pulley

E. Left Arbor Pulley

C. PTO Pulley

 

30

Page 32
Image 32
Snapper 2400 Series manual Belt Replacement, Rider Drive Belt, Mower Belt

2400 Series specifications

The Snapper 2400 Series is a well-engineered line of outdoor power equipment recognized for its robust performance and user-friendly design. Built to deliver outstanding cutting results, this series is suitable for both residential and commercial users who seek reliability and efficiency in their gardening tools.

One of the key features of the Snapper 2400 Series is its powerful engine. Equipped with a high-performance Briggs & Stratton engine, these mowers can handle tough grass and uneven terrains with ease. The reliable starting system eliminates the frustration typical of other models, ensuring that users can get to work quickly and efficiently.

The cutting deck of the Snapper 2400 Series is another highlight. With its innovative design and durable construction, the cutting deck provides a wide mowing path that allows for faster completion of lawn care tasks. The high-quality steel deck is resistant to wear and tear, and its sleek design ensures optimal air flow for a clean cut, further enhancing the mower's performance.

Maneuverability is another standout feature of the Snapper 2400 Series. With features like zero-turn capabilities, users can navigate around trees, flower beds, and other landscape features effortlessly. The ergonomic controls add to the user-friendly experience, making operation smoother and more enjoyable, even for those who may be new to lawn maintenance.

The Snapper 2400 Series is also known for its versatility. Many models within the series offer multiple cutting height adjustments, allowing users to adapt the mower's performance to different grass types and conditions. Furthermore, optional attachments such as mulching kits and baggers provide extra functionality, enabling users to customize their mowing experience.

In terms of durability, the Snapper 2400 Series is built with heavy-duty components that stand up to rigorous use. This quality construction ensures that the products not only perform well but also last longer, offering great value for the investment.

In conclusion, the Snapper 2400 Series combines powerful engines, efficient cutting systems, versatile features, and durable construction, making it a reliable choice for anyone looking for high-quality lawn care equipment. With its emphasis on user experience and performance, the Snapper 2400 Series stands out in its category, appealing to homeowners and professionals alike.