Features& Cofltrols,

_ Attachment Lift Control Lever

When using the mower deck, lift the deck off the ground while transporting to and from the job site. DO NOT cut with the mower in the raised, transport position.

The attachment lift control lever raises and lowers

attachments that utilize the tractor's hydraulic lift cylinder. This lever also controls attachments that use the tractor's

auxiliary hydraulics via the quick couplers on the front left and right sides of the frame.

When using a mower deck (Front / Rear Hydraulic selec- tor switch must be in REAR position), pulling the lever

back raises the attachment lift. Pushing the lever for- ward to the first detent lowers the attachment lift.

Pushing the lever forward to the second detent locks the control in "float" position, allowing the lift mechanism to float up and down. Float is the recommended position when mowing.

For a complete explanation on this control, see

HYDRAULIC SYSTEM FUNCTIONS.

Ground Speed Pedals

The tractor's forward ground speed is controlled by the forward ground speed control pedal. The tractor's reverse ground speed is controlled by the reverse ground speed control pedal. Note that the further down the pedal is depressed, the faster the tractor will travel.

_ Parking Brake

The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depressing the brake pedal and pulling the knob out engages the parking brake. Refer to page 10 for a full explanation of parking brake functions.

_" Steering Tilt Adjust (Select Models)

Use the tilt knob located on the bellows to release the pivot mechanism and pivot the wheel to the desired posi- tion. Release the tilt knob to lock in position.

H_ Cutting Height Adjustment

The cutting height adjustment switch controls the mower cutting height. This same switch also controls the spout rotator motor when a snowthrower is installed. The

arrows on the switch correspond to the direction of adjustment (UP arrow raises cutting height, RIGHT arrow rotates the spout right, etc). The mower cutting height is infinitely adjustable between 1" to 4-13/32" (2,5 cm-11,2 cm). When the adjustment indicator has reached the end of its travel, release the switch; holding the switch down will damage the motor.

_'_ Ignition Switch

The ignition switch starts and stops the engine, it has three positions:

OFF

Stops the engine and shuts off the

 

electrical system.

_RUN

Allows the engine to run and powers the

 

 

electrical system. Activates the glow

 

plugs on diesel models

W START

Cranks the engine for starting.

NOTE. Never leave the ignition switch in the RUN posi- tion with the engine stopped-this drains the battery.

DBrake Pedal

Depressing the brake pedal applies the tractor brake. Depressing the brake pedal will also return the cruise control lever to neutral.

_Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever, position the seat as desired, and release the lever to lock the seat into position.

H D Cruise Control

The cruise control is used to lock the ground speed con- trol in forward. Move the lever forward until the desired

ground speed is reached. To disengage the cruise con- trol move the lever back. In the event you need to stop

quickly, depressing the brake pedal will also return the cruise control to neutral.

2=Wheel / 4-Wheel Drive Selector

(Select Models)

The 2-wheel/4-wheel drive selector disengages the front wheels in the 2-wheel drive position and drives all four wheels in 4-wheel drive position. Engage / disen- gage the 4-wheel drive control only when stopped or at slow speeds.

Transmission Release Valve Lever

The transmission release valve lever deactivates the transmission so that the tractor can be pushed by hand.

See PUSHING THE TRACTOR BY HAND for opera- tional information.

r_ Fuel Tank

To remove the cap, turn counterclockwise.

11

Page 12
Image 12
Snapper 2690629, 2690628 manual Features& Cofltrols

2690629, 2690628 specifications

Snapper 2690628 and 2690629 are innovative lawn care solutions that have gained significant attention in the outdoor equipment market. These models are designed for homeowners who seek efficiency and reliability in their lawn maintenance routine. Featuring powerful engines and cutting-edge technology, they stand out as top contenders for those who prioritize performance and ease of use.

One of the main features of the Snapper 2690628 and 2690629 is their robust engine performance. Both models are equipped with reliable Briggs & Stratton engines that provide ample power for tackling dense grass and tough terrain. This ensures that users can complete their mowing tasks quickly and efficiently, with minimal effort required.

These mowers are designed with ease of use in mind. The intuitive controls and ergonomic design allow for comfortable handling during extended mowing sessions. The push-button start feature eliminates the hassle of pulling cords, making it easier for users to get started. Furthermore, the adjustable cutting height feature gives users the versatility to achieve their desired grass length, whether they prefer a golfing green finish or a more natural look.

Another noteworthy technology is the mulching capability featured in both models. The Snapper 2690628 and 2690629 can effortlessly convert grass clippings into fine mulch. This not only reduces yard waste but also returns valuable nutrients to the soil, promoting a healthier lawn. Additionally, the side discharge option allows for efficient grass disposal, making it suitable for various mowing preferences.

Durability is another significant characteristic of the Snapper 2690628 and 2690629. Both models feature a sturdy steel deck that withstands the rigors of outdoor use, ensuring longevity. The rust-resistant finish further enhances their lifespan, allowing users to enjoy the benefits of their mowers for years to come.

In conclusion, the Snapper 2690628 and 2690629 represent a remarkable combination of power, technology, and user-friendly features. With their reliable engines, ergonomic designs, and practical mowing capabilities, they are ideal choices for homeowners looking to maintain a pristine lawn effortlessly. These models not only prioritize performance but also emphasize comfort and durability, making them valuable additions to any lawn care arsenal.