Change Transmission Oil & filter

Service Interval: After first the 50 hours, then every 250

®Do not allow dirt, water, or other debris to enter the expansion chamber or transmission. Even a small amount of dirt

can damage the transmission

hours.

Oil Type: Type F Automatic Transmission Fluid

Oil Capacity: 2WD: 7.3-8.4 qt. (7-8L), 4WD: 7.7-8.8 qt.

(7,3-8,3L), 4WD w/540PTO: 9-10 qt. (8,5-9,5L)

Oil Filter Part No.: 1726194

The transmission fluid and filter should be changed at the intervals listed above, or when performing repair work, or if fluid has become discolored from overheating or contamination.

Replace the transmission filter whenever changing trans- mission fluid. Make sure filter base and surrounding area is absolutely clean before removing the old filter.

1.Drain hydrostatic system by removing the 17mm drain plug (B, Figure 26).

2.Clean the base and replace the filter (A, Figure 26) using an appropriate filter wrench. Reinstall the drain plug.

3.Add Type F transmission fluid through the oil fill (see Figure 25).

4.Run tractor for several minutes until transmission is warm and check fluid level using the dip stick (A, Figure 25).

RegularMaintenance

Figure 26. Transmission

A. Transmission Filter

B. 17ram Drain Plug

Check Front Axle Oil Level

Service Interval: Every 25 Hours

Oil Type: 80W-90 Gear Lube

1.Clean the area around the front axle dip stick (A, Figure 27).

2.Remove the dip stick and wipe it clean.

3.Reinsert the dip stick without threading it in. Remove the dips stick and check the oil level. Oil should be even with the top of the hash marked area.

SERVICE NOTES: The axle oil does not require chang- ing unless it has been contaminated. To change the oil, drain the main axle cavity" and the two lower spindle cavi- ties by removing the drain plugs. When filling the axle after a complete draining it is necessary to fill the lower spindle cavities through their fill holes as weft as the main cavity. After the initial filling the oil level of all three cavities can be checked at the dip stick (A) as oil will seep from the main cavity to the lower ones.

Figure 27. Front Axle Lube

A.Dip Stick

29

Page 29 Page 31
Page 30
Image 30
Snapper 2690629, 2690628 manual Change Transmission Oil & filter, Check Front Axle Oil Level, 17ram Drain Plug
Page 29 Page 31

2690629, 2690628 specifications

Snapper 2690628 and 2690629 are innovative lawn care solutions that have gained significant attention in the outdoor equipment market. These models are designed for homeowners who seek efficiency and reliability in their lawn maintenance routine. Featuring powerful engines and cutting-edge technology, they stand out as top contenders for those who prioritize performance and ease of use.

One of the main features of the Snapper 2690628 and 2690629 is their robust engine performance. Both models are equipped with reliable Briggs & Stratton engines that provide ample power for tackling dense grass and tough terrain. This ensures that users can complete their mowing tasks quickly and efficiently, with minimal effort required.

These mowers are designed with ease of use in mind. The intuitive controls and ergonomic design allow for comfortable handling during extended mowing sessions. The push-button start feature eliminates the hassle of pulling cords, making it easier for users to get started. Furthermore, the adjustable cutting height feature gives users the versatility to achieve their desired grass length, whether they prefer a golfing green finish or a more natural look.

Another noteworthy technology is the mulching capability featured in both models. The Snapper 2690628 and 2690629 can effortlessly convert grass clippings into fine mulch. This not only reduces yard waste but also returns valuable nutrients to the soil, promoting a healthier lawn. Additionally, the side discharge option allows for efficient grass disposal, making it suitable for various mowing preferences.

Durability is another significant characteristic of the Snapper 2690628 and 2690629. Both models feature a sturdy steel deck that withstands the rigors of outdoor use, ensuring longevity. The rust-resistant finish further enhances their lifespan, allowing users to enjoy the benefits of their mowers for years to come.

In conclusion, the Snapper 2690628 and 2690629 represent a remarkable combination of power, technology, and user-friendly features. With their reliable engines, ergonomic designs, and practical mowing capabilities, they are ideal choices for homeowners looking to maintain a pristine lawn effortlessly. These models not only prioritize performance but also emphasize comfort and durability, making them valuable additions to any lawn care arsenal.
Top Page Image Contents