Snapper 5600W Portable Generator

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

In some areas, generators are required to be registered with local utility companies.

If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

WARNING

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

DO NOT touch bare wires or receptacles.

DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

DO NOT operate generator in the rain.

DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

DO NOT allow unqualified persons or children to operate or service generator.

Generator Location

Generator Clearance

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Operate generator ONLY outdoors.

Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

The generator must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (92 cm) all around generator including overhead, for adequate cooling, maintenance and servicing.

Place generator in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place generator where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 3). Prevailing winds and air currents should be taken into consideration when positioning generator.

Figure 3 — Generator Clearance

Typical Generator Shown

Exhaust Port

8

Page 8
Image 8
Snapper 30215 Using the Generator, System Ground, Connecting to a Building’s Electrical System, Generator Location

30215 specifications

The Snapper 30215 is a versatile and powerful lawn mower designed for both residential and professional use. It is equipped with a range of features and technologies that make it a popular choice among homeowners and landscapers alike.

One of the standout characteristics of the Snapper 30215 is its robust Briggs & Stratton engine. This reliable engine ensures efficient power delivery, enabling the mower to tackle even the most challenging terrains with ease. With a 21-inch cutting deck, it provides an ideal balance between maneuverability and cutting capacity, allowing users to efficiently mow lawns of various sizes. The deck is made from high-quality materials, ensuring durability and longevity.

The Snapper 30215 is also engineered with the innovative “ReadyStart” technology. This feature eliminates the need for priming or choking, making start-up hassle-free and quick. Users can start the mower with just a simple pull, allowing them to focus on mowing rather than wrestling with the machine.

Another crucial aspect of the Snapper 30215 is its adjustable cutting height. With a single lever adjustment, users can choose from multiple cutting heights, allowing for precise lawn maintenance tailored to individual preferences or seasonal requirements. This flexibility ensures that users can achieve the perfect cut, whether it's a low trim in the fall or a higher cut in the summer months.

Furthermore, the Snapper 30215 incorporates a mulching feature, enabling users to finely chop grass clippings and return them to the lawn as natural fertilizer. This not only reduces yard waste but also contributes to a healthier, greener lawn.

The mower is designed for optimal user comfort, featuring ergonomic handles that reduce fatigue during extended mowing sessions. Additionally, its lightweight construction allows for easy maneuverability, making it suitable for navigating small spaces and tighter corners in the yard.

In terms of maintenance, the Snapper 30215 is straightforward. Its easy-access design allows users to perform routine checks and maintenance tasks without hassle, ensuring sustained performance over time.

In conclusion, the Snapper 30215 is a reliable and efficient lawn mower packed with features and technologies designed to enhance the mowing experience. Its powerful engine, adjustable cutting heights, and user-friendly design make it an excellent choice for anyone looking to maintain a well-manicured lawn.