Snapper 5600W Portable Generator

OPERATING THE

GENERATOR

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator”.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

Starting the Engine

Disconnect all electrical loads from the generator. Use the following start instructions:

1.Make sure unit is on a level surface.

IMPORTANT: Failure to start and operate unit on a level surface will cause the unit not to start or shut down during operation.

2.Turn the fuel valve to the “On” position (Figure 4).The fuel valve handle should be vertical (pointing toward the ground) for fuel to flow.

Figure 4 — Fuel Valve

Fuel Valve is shown in the On position

3.Start engine according to instructions given in the engine owner’s manual.

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

NOTE: If engine starts after 3 pulls but fails to run, or if unit shuts down during operation, make sure unit is on a level surface and check for proper oil level in crankcase.

This unit may be equipped with a low oil protection device. See engine manual.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The generator must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of generator for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

Connecting Electrical Loads

•Let engine stabilize and warm up for a few minutes after starting.

•Plug in and turn on the desired 120 and/or 240 Volt AC, single phase, 60 Hz electrical loads.

•DO NOT connect 240 Volt loads to the 120 Volt duplex receptacles.

•DO NOT connect 3–phase loads to the generator.

•DO NOT connect 50 Hz loads to the generator.

•DO NOT OVERLOAD THE GENERATOR. See “Don’t Overload Generator”.

Stopping the Engine

1.Turn OFF and unplug all electrical loads from generator panel receptacles. NEVER start or stop engine with electrical devices plugged in and turned ON.

2.Let engine run at no-load for several minutes to stabilize internal temperatures of engine and generator.

3.Turn engine off according to instructions given in the engine owner’s manual.

4.Move fuel valve to “Off” position.

9

Page 8 Page 10
Page 9
Image 9
Snapper 30215 owner manual Operating Generator, Starting the Engine, Connecting Electrical Loads, Stopping the Engine
Page 8 Page 10

30215 specifications

The Snapper 30215 is a versatile and powerful lawn mower designed for both residential and professional use. It is equipped with a range of features and technologies that make it a popular choice among homeowners and landscapers alike.

One of the standout characteristics of the Snapper 30215 is its robust Briggs & Stratton engine. This reliable engine ensures efficient power delivery, enabling the mower to tackle even the most challenging terrains with ease. With a 21-inch cutting deck, it provides an ideal balance between maneuverability and cutting capacity, allowing users to efficiently mow lawns of various sizes. The deck is made from high-quality materials, ensuring durability and longevity.

The Snapper 30215 is also engineered with the innovative “ReadyStart” technology. This feature eliminates the need for priming or choking, making start-up hassle-free and quick. Users can start the mower with just a simple pull, allowing them to focus on mowing rather than wrestling with the machine.

Another crucial aspect of the Snapper 30215 is its adjustable cutting height. With a single lever adjustment, users can choose from multiple cutting heights, allowing for precise lawn maintenance tailored to individual preferences or seasonal requirements. This flexibility ensures that users can achieve the perfect cut, whether it's a low trim in the fall or a higher cut in the summer months.

Furthermore, the Snapper 30215 incorporates a mulching feature, enabling users to finely chop grass clippings and return them to the lawn as natural fertilizer. This not only reduces yard waste but also contributes to a healthier, greener lawn.

The mower is designed for optimal user comfort, featuring ergonomic handles that reduce fatigue during extended mowing sessions. Additionally, its lightweight construction allows for easy maneuverability, making it suitable for navigating small spaces and tighter corners in the yard.

In terms of maintenance, the Snapper 30215 is straightforward. Its easy-access design allows users to perform routine checks and maintenance tasks without hassle, ensuring sustained performance over time.

In conclusion, the Snapper 30215 is a reliable and efficient lawn mower packed with features and technologies designed to enhance the mowing experience. Its powerful engine, adjustable cutting heights, and user-friendly design make it an excellent choice for anyone looking to maintain a well-manicured lawn.
Top Page Image Contents