5
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER Rear Engine Rider. Its purpose, aside from
recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 & 3 of this manual and All
SAFETY messages on the Rear Engine Rider and its
attachments before operating.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER Rear Engine Rider. It is
recommended that all operator’s of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner’s manual. Study these
manuals before operating and keep both handy for future
reference.
REAR BUMPER
FUEL TANK
TRANSMISSION SHIFT LEVER
VENT
FUEL
FILLER
CAP
DISCHARGE
DEFLECTOR
STEERING
WHEEL
OPERATOR’S
SEAT
DECK LIFT LEVER
CONTROL PANEL
(SEE INSERT)
CLUTCH/BRAKE
PEDAL
BLADE
PEDALS
BLADE
LEVER
MOWER
DECK
MOWER
BELT
COVER
CONTROL PANEL
IGNITION
SWITCH
ENGINE SPEED
CONTROL
PARK
BRAKE
LEVER
REMOTE CHOKE
LOCATED ON LEFT
SIDE OF SEAT
OVERRIDE
LEVER