S t o r a g e
TEMPORARY STORAGE
(30 Days Or Less)
Remember, the chipper/shredder fuel tank probably will still contain some gasoline, so never store the chipper/ shredder indoors or in any other area where fuel vapor could travel to any ignition source. Fuel vapor is also toxic if inhaled, so never store the chipper/shredder in any structure used for human or animal habitation.
Here’s a quick checklist of things to do when storing your chipper/shredder temporarily, or between uses:
•Store the unit in a location where there’s no danger of overhead objects falling into the chipper cone or shredder hopper.
*2571
Figure 14. Improper Placement Of Unit
• Keep the unit in an area away from where children | *2570 |
|
| |||||
| may come into contact with it. If there’s any chance |
|
|
|
| |||
| of unauthorized use, remove the spark plug, and put |
|
|
|
| |||
| it in a safe place. Be sure to protect the spark plug |
|
|
|
| |||
| opening from foreign objects with a suitable cover. |
|
|
|
| |||
• Never put the unit away while the engine is still hot |
|
|
|
| ||||
| from running. Let the engine cool down first to pre- |
|
|
|
| |||
| vent the chance of fire. |
|
|
|
|
| ||
• | Never try to lift or position the unit in the sto age a ea |
|
|
|
| |||
| by holding the fuel tank. Always let the engine and |
|
|
|
| |||
|
|
|
|
| ||||
| muffler cool completely before allowing y u self to |
|
|
|
| |||
| contact these parts. |
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
• | If the unit can’t be stored on a reasonably level sur- |
|
|
|
| |||
|
|
|
| |||||
| face, use a block of wood to chockforhe wheels. | Figure 15. Improper Lifting Of Unit | ||||||
| Never store the Chipper/Shredder where it will n t be | • Remove spark plug, and squirt 1 ounce of SAE 30 oil | ||||||
| in a stable position. |
|
| |||||
|
|
|
| into spark plug hole. | ||||
• | Never tip the unit more than 75° from vertical, and |
| ||||||
• | Plug hole and pull starter cord slowly to distribute oil | |||||||
| never lay the unit down on its side, as this could cause | |||||||
|
| evenly in cylinder head area. | ||||||
| fuel leakage, and/or undesirable oil transf r into the |
| ||||||
|
| Not | • | Reinstall spark plug. | ||||
| cylinder head and spark plug area. Exc ssive oil in the | |||||||
| cylinder head will prevent unit from starting properly. | • | Transport unit to a suitable storage location. If you | |||||
|
|
|
| |||||
• Overhead objects that fall into shredder hopper may |
| have chosen to use a fuel stabilizer and have not | ||||||
| cause damage to the unit or serious injury to user |
| drained the fuel system, follow all safety instructions | |||||
|
|
| Reproduction | |||||
| and others if not detected before unit is started. |
| and storage precautions in this manual to prevent the | |||||
|
|
|
|
| possibility of fire from the ignition of gasoline fumes. | |||
LONG TERM STORAGE |
| Remember, gasoline fumes can travel to distant | ||||||
| sources of ignition and ignite, causing risk of explo- | |||||||
(Longer Than 30 Days) |
|
| ||||||
|
| sion and fire. | ||||||
Your chipper/shredder can be safely stored during off- |
| |||||||
• Cover chipper/shredder unit to protect shredder hop- | ||||||||
seasons by following these simple storage instructions: | ||||||||
| per and chipper cone from debris and foreign objects. | |||||||
• Drain fuel system completely following engine manu- | • | If there is any possibility of unauthorized use or tam- | ||||||
| facturer’s instructions or add fuel stabilizer to prevent | |||||||
|
| pering, remove the spark plug and store it in a safe | ||||||
| fuel from gumming up during extended storage peri- |
| ||||||
|
| place before storing the chipper/shredder unit away. | ||||||
| od. |
|
|
| ||||
|
|
|
| Be sure to plug the spark plug hole to prevent foreign | ||||
|
|
|
|
| ||||
• Clean external surfaces, engine and cooling fan. |
| material from entering. |
21