Snapper 5201m, 5201e Controls & Operation, Engine & Starting Controls, Electric Start Units Only

Models: 5201m, 5201e

1 20
Download 20 pages 48.58 Kb
Page 10
Image 10
ENGINE & STARTING CONTROLS

ENGINE & STARTING CONTROLS

NOTE: Engine Speed Control - This snow thrower does NOT have an engine speed control. Engine speed is set at the factory. The engine governor maintains operat- ing speed for varying snow removal conditions.

Electric Start Units Only

A.Electric Start Button - The electric start Button (A, Figure 6) activates an electric starter mounted to the engine, eliminating the need to pull the starter han- dle. The electric start button operates on 120 Volts AC, which is provided by connection to the extension cord provided with units equipped with this feature.

Connect this extension cord ONLY to a properly grounded 3 prong electrical outlet.

All Models

B.Fuel Tank Cap - Cover fuel tank & provides venting ability to prevent vapor lock.

C.Starter Handle - The starter handle (C, Figure 6) connects to a starter cord to manually start the engine. Pulling starter handle rapidly spins the engine crankshaft, cycles the engine, and generates the spark necessary for starting the engine.

D.Primer Button - When pressed, the primer button (D, Figure 6) provides initial fuel to help start a cold engine. Normally, pressing the primer button twice will provide enough fuel to start a cold engine.

E.Engine Key - Insert key in switch and turn key to ON position when starting engine. To stop engine, turn key to OFF position.

F.Choke Control - The is control (F, Figure 6) adjusts the fuel/air mixture, and is used to help start a cold engine by providing a richer mixture.Once the engine is warm and running smoothly, the choke control should be set to the off position to provide a normal air/fuel mix.

Controls & Operation

 

C

 

B

 

E

F

A

 

D

Figure 6. Engine Controls

A

Electric Start

Activates electric starter

 

Button

 

 

(Optional)

 

 

 

 

B

Fuel Tank

Covers fuels tank and provides

 

Cap

venting to prevent vapor lock

 

 

 

C

Starter Handle

Used to start engine

 

 

 

D

Primer Button

Primes carburetor for faster cold

 

 

starting.

 

 

 

E

Engine Key

Prevents starting of engine with-

 

 

out key. Stops engine when

 

 

removed.

 

 

 

F

Choke Control

Adjusts air/fuel mixture

 

 

 

9

Page 10
Image 10
Snapper 5201m, 5201e manual Controls & Operation, Engine & Starting Controls, Electric Start Units Only, All Models