Safety Rules & Information

This machine is capable of amputating hands and feet. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or

bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed.

TRAINING

1.Read, understand, and follow all instructions on the machine and in the manuals before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, partic- ularly small children and pets.

4.Exercise caution to avoid slipping or falling especially when operating in reverse.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used and remove all doormat, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting engine (motor).

3.Do not operate the equipment without wearing ade- quate winter outer garments. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable.

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot engine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. Replace fuel cap securely and wipe up spilled fuel.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place con- tainers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such on a trailer with a portable container, rather than from a gasoline dis- penser nozzle.

(f)Keep nozzle in contact with the rim of the fuel tank or container opening at all times, until refueling is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing imme- diately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surfaces.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by the manufacturer).

8.Let engine (motor) and machine adjust to outdoor temperatures before starting to clear snow.

9.Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eye from foreign objects that may be thrown from the machine.

TP-600-3606-02-LW-UV

OPERATION

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snowthrower for any damage, and repair the damage before restarting and operating the snowthrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and when making any repairs, adjustments, or inspec- tions.

6.When cleaning, repairing, or inspecting make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting.

7.Do not run the engine indoors except for starting the engine or for transporting the snowthrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes. Do not attempt to clear steep slopes.

9.Never operate the snowthrower without proper guards, plates, or other safety protective devices in place and working.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snowthrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snowthrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snowthrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk, never run.

16.Never touch a hot engine or muffler.

17.Never operate the snowthrower near glass enclo- sures, automobiles, window wells, drop-offs, and the like without proper adjustment of the discharge angle.

18.Never direct discharge at bystanders or allow anyone in front of the unit.

19.Never leave a running unit unattended. Always disen- gage the auger and traction controls, stop engine, and remove keys.

20.Do not operate the unit while under the influence of alcohol or drugs.

2

Page 3
Image 3
Snapper 555M, 555M, 15225, E15225, 18245E, E18245, 860E, 860M manual Safety Rules & Information

555, 555M, 555M, 15225, E15225, 18245E, E18245, 860E, 860M specifications

Snapper's range of products, including the Snapper 555, 555M, 55555M, 15225, E15225, 18245E, E18245, 860E, and 860M, showcases advanced engineering and innovative design in the realm of outdoor power equipment. These models cater to homeowners and professionals alike, delivering reliable performance and versatile functionality for various landscaping tasks.

One of the hallmark features of the Snapper 555 series is its robust build quality. These mowers are engineered with durable materials, ensuring longevity even under extensive use. They are designed to handle various terrain types, providing users with the confidence to tackle challenging landscapes. The 555M and 55555M variants include additional power enhancements that cater to larger properties, optimizing cutting efficiency with their powerful engines.

The Snapper 15225 and E15225 models are particularly notable for their lightweight design, which facilitates maneuverability in tight spaces. These models excel in residential lawns, featuring a compact body without sacrificing cutting performance. The electric version, E15225, offers an eco-friendly alternative, operating quietly and producing zero emissions, making it perfect for environmentally conscious homeowners.

In contrast, the Snapper 18245E and E18245 models are built for more extensive lawn care. They incorporate larger cutting decks and advanced blade technologies, ensuring a clean and even cut. The ergonomic design of these mowers provides enhanced comfort, reducing operator fatigue during longer mowing sessions.

The Snapper 860E and 860M models are engineered to deliver high performance in commercial applications. These powerful machines are equipped with advanced engine technology that maximizes fuel efficiency while providing ample power for tough mowing jobs. Their heavy-duty construction allows them to withstand the rigors of professional use, making them a valuable asset for landscapers and lawn care services.

Overall, the Snapper lineup embodies a commitment to quality, efficiency, and user-friendly designs. Each model incorporates unique features and cutting technologies tailored for specific user needs, whether it be residential mowing or professional landscaping. With their reputation for reliability and performance, Snapper's mowers continue to be a preferred choice for those seeking high-quality outdoor power equipment.