Operator Safety

 

 

 

 

 

 

 

 

Safety Alert Symbol & Signal Words

 

 

 

 

 

 

 

 

 

 

Safety Interlock System

 

 

The alert symbol

is used to identity safety information

 

 

 

 

 

about hazards that can result in personal injury. A signal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

word (DANGER, WARNING, or CAUTION) is used with the

 

 

 

 

 

 

 

 

alert symbol to indicate the likelihood and the potential

This unit is equipped with safety interlock switches. These

 

severity of the injury. In addition, a hazard icon may be

 

used to represent the type of hazard. An explanation of

safety systems are present for your safety, do not attempt

 

 

hazard levels and icons are as follows:

to bypass safety switches, and never tamper with safety

 

devices. Check their operation regularly.

 

 

 

DANGER

 

 

 

 

 

 

Operational SAFETY Checks

 

 

 

This indicates a hazard which, if not avoided, will result in

 

 

 

serious injury or death.

 

 

 

 

 

 

 

 

Test 1 — Engine should NOT crank if:

 

 

 

 

 

 

 

WARNING

 

• PTO switch is engaged, OR

 

 

 

 

 

 

 

 

 

This indicates a hazard which, if not avoided, could result

 

Parking brake is not engaged, OR

 

 

 

 

 

 

 

 

 

in serial injury or death.

 

Motion control handles are not in the NEUTRAL

 

 

 

 

 

 

 

 

 

 

 

 

 

position.

 

 

 

 

CAUTION

 

Test 2 — Engine SHOULD crank if:

 

 

 

This indicates a hazard which, if not avoided, might result

 

 

• PTO switch is NOT engaged, AND

 

 

 

 

in minor or moderate injury.

 

 

 

 

 

 

 

 

 

 

Reproduction

 

Parking brake is engaged, AND

 

 

 

 

NOTICE

 

 

 

Motion control handles are locked in the NEUTRAL

 

for

 

 

 

 

 

These messages prese ted without the alert symbol

 

 

position.

 

 

 

 

indicate a situat

n where the u it or property could be

Test 3 — Engine should SHUT OFF if:

 

 

damaged.

 

 

 

 

 

 

 

 

 

 

 

Not

 

 

 

 

 

Operator rises off seat with PTO engaged, OR

 

 

 

 

 

 

Operator rises off seat with parking brake disengaged.

 

 

 

 

 

Operator moves motion control handles ut f their

 

 

 

 

 

 

neutral positions before disengaging parking brake.

 

 

 

 

Test 4 — Blade Brake Check

 

 

 

 

 

 

 

Mower blades and mower drive belt should come to a

 

 

 

 

 

complete stop within seven (7) seconds after electric PTO

 

 

 

 

switch is turned off (or operator rises off seat). If mower

 

 

 

 

drive belt does not stop within seven (7) s conds, s

your

 

 

 

 

dealer.

 

 

 

 

 

 

 

NOTE: Once the engine has stopped, PTO switch must be

 

 

 

 

turned off, parking brake must be engaged, and the motion

 

 

 

 

control handles must be locked in the NEUTRAL position

 

 

 

 

after the operator returns to the seat in order to start the

 

 

 

 

engine.

 

 

 

 

 

 

 

WARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

12

www.SnapperPro.com