SECTION 1 – INSTALLATION
WARNING
DO NOT attempt any adjustments, maintenance, repairs, service, and unclogging grass tube or deck adapter with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key from ignition switch. Remove spark plug wire(s) and secure wire(s) away from spark plug(s). Engine, muffler and surrounding areas are extremely hot. Allow components to cool down before installing kit. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. Grass Catchers affect handling & stability of all machines. Exercise extreme caution when operating on slopes. DO NOT operate machine on slopes greater than 10 degrees. DO NOT mow across slopes - mow up & down. DO NOT park machine on slopes.
1.4FRONT WEIGHT KIT INSTALLATION (Continued From Previous Page)
B. Place end brackets on top of weights and front axle. See Figure 1.5A.
C. Install all four flat washers and top nuts and tighten securely. See Figure 1.5B.
END
BRACKETS
PLACE END BRACKETS
ON TOP OF WEIGHTS AND AXLE
FIGURE 1.5A
INSTALL ALL WASHERS
AND NUTS. TIGHTEN
SECURELY
FIGURE 1.5B
9
