Snapper Installing the Seat

8/2008 9TP 300-5412---ZT-SN
Axion / 150Z Series
5/16-18 x 3/4
14-19 ft. lbs.
19-25 N.m.
Installing the Seat
1. Raise the seat base.
2. Align the holes in the seat bottom with the holes in the
seat base.
3. Secure the seat to the seat base with four 5/16-18 x
3/4” bolts. Torque to 14-19 ft. lbs. (19-25 N.m.) See
Figure 5.
Figure 5. Installing the seat