Section 2 - OPERATING INSTRUCTIONS
2.3.5. CUTTING HEIGHT ADJUSTMENT
This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving deck cutting height to a lower cutting position.
1.Grasp both handles together to disengage latch.
2.Raise or lower handles to desired height.
3.Release lower handle to engage latch. See Figure 2.9.
DECK LIFT | DECK LIFT HANDLE SHOWN |
HANDLE | IN HIGHEST NOTCH. |
RELEASE
LEVER
DETENT
CONNECTING BAR OMITTED IN THISPLATE
VIEW FOR CLARITY
FIGURE 2.9
WARNING
DO NOT park machine on slopes.
9
