Section 3 - MAINTENANCE

3.1 INTRODUCTION

To retain the quality of the YARD CRUISER, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number.

3.2 SERVICE - AFTER FIRST 5 HOURS

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

3.2.1. CHANGE ENGINE OIL

1.Place bricks or wooden blocks under the front wheels to lower rear of engine.

2.Place a 4 quart minimum capacity container under the end of the oil drain.

3.Loosen or remove oil fill cap on engine.

4.Install the drain hose (Supplied in hardware bag) onto drain plug nipple and place hose into drain container.

5.Rotate drain plug counter-clockwise and pull out to open and allow oil to drain out. See Figure 3.1.

INSTALL HOSE

ONTO OIL DRAIN

NIPPLE

ROTATE 1/4 TURN

COUNTERCLOCKWISE

AND PULL OUT TOOIL DRAIN

DRAIN ENGINE OIL.

FIGURE 3.1

6.After all the oil has drained, close the drain by pushing in and rotating clockwise to close. Wipe up any oil that may have spilled. Dispose of drained oil properly. See Figure 3.1.

7.Change oil filter at every oil change. Refer to your engine owner’s manual for service instructions.

8.Fill engine crankcase with new oil. Refer to your engine owner’s manual for oil specifications.

3.2.2. CHECK MOWER BLADE

1.Make sure fuel cap is on tight. Turn fuel shut off valve to the “CLOSED” position. Start engine and allow it to run until engine runs out of fuel. Close vent on fuel filler cap. See Figure 2.3.

2.Engage parking brake.

3.Turn key to “OFF” position and remove key from ignition switch.

WARNING

Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.Carefully stand YARD CRUISER on rear bumper. It may be necessary to have help to stand unit up.

5.Check torque of blade mounting bolts. Torque to: 42” Decks -- 30 to 40 ft. lbs.

48” Deck – 60 to 70 ft. lbs. See Figure 3.2.

6.Check blade for sharpness, wear and damage. Refer to Section “BLADE WEAR LIMITS”.

TORQUE BLADE MOUNTING

BOLTS TO 30 TO 40 FT. LBS.

SINGLE BLADE DECK

TORQUE BLADE

MOUNTING BOLTS

TWIN & TRIPLE BLADE DECK

FIGURE 3.2

7.Check blade for straightness.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

11

Page 9 Page 11
Page 10
Image 10
Snapper HZS18483BVE, HZS15423KVE Service After First 5 Hours, Change Engine OIL, Check Mower Blade, Single Blade Deck
Page 9 Page 11

HZS15423KVE, HZS18483BVE, HZS18483BVE, HZS15423KVE specifications

Snapper has long been a trusted name in outdoor power equipment, and their line of lawn mowers is no exception. Among their impressive offerings are the Snapper HZS18483BVE, HZS15423KVE, and HZS15423KVE models. Each of these mowers is designed to provide exceptional performance, durability, and ease of use, catering to the needs of homeowners and professional landscapers alike.

The Snapper HZS18483BVE is equipped with an 18-inch cutting deck, making it ideal for medium to large lawns. Its powerful, easy-start engine ensures that you can get to work promptly. The mower features a 3-in-1 cutting system, allowing for mulching, bagging, and side discharge capabilities. This versatility provides homeowners with the flexibility to manage grass clippings according to their own preferences.

One of the standout characteristics of the HZS18483BVE is its patented SureCut technology, which enables a superior cutting performance across various grass types and conditions. Additionally, its lightweight design and self-propulsion feature make it easy to maneuver and navigate around obstacles, allowing for a more efficient mowing experience.

The Snapper HZS15423KVE and HZS15423KVE models, while similar, offer their unique features aimed at different mowing needs. Both mowers come with a 21-inch cutting deck, perfect for larger areas, and feature the same reliable engine as the HZS18483BVE. The HZS15423KVE is designed with an adjustable cutting height, and smooth rolling wheels that ensure a clean cut every time.

Furthermore, these mowers feature a user-friendly starting system, making them accessible for users of all experience levels. The durable steel construction guarantees longevity, making them a wise investment for any lawn care enthusiast.

When it comes to maintenance, Snapper’s designs allow for easy access to key components, such as the air filter and spark plug, ensuring routine upkeep is hassle-free. These models are also equipped with high-capacity grass bags, enabling longer mowing sessions without frequent emptying.

In conclusion, the Snapper HZS18483BVE and HZS15423KVE models offer exceptional power, performance, and versatility. Their innovative technologies and robust characteristics set them apart in the crowded lawn mower market, providing users with reliable tools to maintain their lawns efficiently. Whether you have a small garden or an expansive yard, these Snapper mowers deliver cutting-edge solutions for any landscaping challenge.
Top Page Image Contents