Section 2 - OPERATING INSTRUCTIONS
2.7TILLING PROCEDURE (Continued from previous page)
3.Set SPEED by moving the THROTTLE CONTROL to desired setting.
4.To start TILLING action, move the WHEEL and TINE SHIFT LEVER to the FWD & TIL position (See Figure 8). Step behind the Tiller and raise the WHEEL and TINE CONTROL BAIL up against the handlebar to start forward movement of the Tiller and rearward rotation of the tines.
MOVE SHIFT LEVER | FWD & TIL | |
POSITION | ||
TO FWD & TIL | ||
| ||
POSITION |
| |
|
|
FIGURE 8
2.7.1TILLING HINTS: Let the Tiller do the work! DO NOT try to hold it back. If forward motion ceases while tilling deep, lift up slightly on the handle bar to resume moving forward.
2.7.2ROUGH TERRAIN HINT: If tilling over very rough, uneven ground, till at a shallow depth setting on the first path to smooth the surface. On especially rough terrain, the Tiller could hang up underneath with the wheels spinning freely. Under this condition, lift the handle bar, then turn the tiller diagonally uphill to regain traction.
7
