3:Install the top wire to the grass bag. Tie the slider to the top wire. Fold bag opening into a "Z" and install slider. See Figure 17.
BAG
SLIDER
“Z” FOLD BAG AS SHOWN
FIGURE 17
4:Install grass bag on the mower as shown in Figure 18.
HOOK BAG HANDLE
OVER MIDDLE HANDLE
SLIDE CONNECTOR
OVER END OF
ADAPTER FLANGE
FIGURE 18
WARNING
DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.
FOAM BLADE BLOCK REMOVAL
Tip mower back against the upper handle to gain access to the underside of the cutting blade. Remove foam shipping block from cutting blade. This must be removed before starting the engine.
IMPORTANT: DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.
Assembly is complete. Complete all items on the
6