Snapper LT-200 manual Transmission Identification, Transmission Maintenance, Regular Maintenance

Transmission Identification

To determine what transmission is in your tractor, check the identification tag attached to the axle of the transmission (Figure 11), or check your tractor’s parts book.

Transmission Maintenance

K46 Maintenance

The K46 is a sealed unit and does not require regular maintenance. If the transmission lacks drive or is excessively noisy, it may need to be purged. See your Dealer.

Regular Maintenance

TUFF TORQ K46Z
10010101	10010101010
A

Figure 11. Transmission ID Tag Location A. ID Tag

Hood Removal and Installation

HOOD REMOVAL

1.Open the hood.

2.Remove the socket and bulbs (A, Figure 12) by twisting the socket counterclockwise and pulling it out of the bezel (B). Repeat on other side.

3.Rock the hood back slightly and lift hood (B, Figure

13)off pivot posts(C). Set hood on a clean and flat surface.

HOOD INSTALLATION

1.Set hinge posts (A, Figure 13) onto pivot posts (C).

2.Roll the hood forward until it reaches the stops (D).

3.Install the socket and bulb (A) by pushing it into the bezel (B) twisting the socket and bulb clockwise. Repeat on other side.

4.Close the hood.

A

A

B

Figure 12. Head Light

A.Socket and Bulb

B.Bezel

	B
D
A	C

Figure 13. Hood Removal and Installation

A.Hinge Post

B.Hood

C.Pivot Post

D.Stop

19