Snapper LT-200 manual Lubrication, Regular Maintenance, Service Interval Every 25 Hours

Regular Maintenance

Lubrication

Service Interval: Every 25 Hours Oil:

Lubricate the unit at the locations shown in Figures 14- 16 as well as the lubrication points listed. Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Wipe surfaces clean before and after lubrication.

Grease:

•steering linkage

•mower linkage

•rear axle shafts (remove wheel hubs)

•front axle pivot

Use grease fittings when present. Automotive lithium grease is recommended.

Figure 14. Lubricate Tractor

•foot pedal rods & brackets

•seat adjustment assembly

•draglink

•mower deck height adjustment linkage

•transmission idler assembly

20