Getting started
5

Changing the display

Setting the date and time

Setting the date & time, first time

The
Date and Time have been reset
message appears the first time you turn on
the camera or if the batteries are removed for an extended time.
1SET DATE & TIME is highlighted. Press the OK button.
(Select Cancel to set the date and time at a later time.)
2Go to step 4 below, Setting the date & time, anytime.

Setting the date & time, anytime

1Turn on the camera. Press the Menu button.
2Press to highlight Setup Menu , then press the OK button.
3Press to highlight Date & Time , then press the OK button.
4Press to adjust the date and time. Press to advance to the next
setting.
5When finished, press the OK button.
6Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may let your
computer update the camera clock when you connect the camera. See the EasyShare
software Help for details.
If you want to Then do this
Turn the camera screen on or off. Press the OK button.
Change the camera screen setting so
that it is on whenever the camera is on.
See Liveview, page20.
Show/Hide the status icons when the
camera screen is off.
Press .