Operating the Tractor
Adjusting Mower Cutting Height
The cutting height lift lever (A, Figure 7) controls the mower cutting height. The cutting height is has seven positions between approximately
Attaching a Trailer
The maximum horizontal drawbar force allowed is 280 Newton. The maximum vertical drawbar force is 160 Newton. This equates to a 250 lbs (113 kg) trailer on a 10 degree hill. Secure the trailer with an appropriately sized clevis pin (A, Figure 8) and clip (B).
WARNING
Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion.
Fuel vapor is also toxic to humans and animals.
Storage
Before you store your unit for the
•Disengage the PTO, set the parking brake, & remove the key.
•Perform engine maintenance and storage measures listed in the engine owner’s manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed structure - see warning).
•Battery life will be increased if it is removed, put in a cool, dry place and fully charged about once a month. If the battery is left in the unit, disconnect the negative cable.
Before starting the unit after it has been stored:
•Check all fluid levels. Check all maintenance items.
•Perform all recommended checks and procedures found in the engine owner’s manual.
•Allow the engine to warm up for several minutes before use.
A |
Figure 7. Raising & Lowering Mower
A. Mower Lift Lever
A |
B |
Figure 8. Trailer Weight Recommendations
A.Clevis Pin
B.Clip
16
