1.Remove the protective cap from the battery terminal.
2.Fasten the red cable and terminal cover (if equipped) to the positive (+) terminal with the fasteners as shown (Figure 9).
3.Fasten the black cable to the negative
D | E |
C | A |
| |
B |
|
| F |
A |
|
H | G |
Figure 9: Battery
A - Carriage bolt
B - Wing nut
C - Black cable
D - Positive (+) terminal
E - Red cable
F - Battery
G - Battery tray
H - Terminal cover (Also see ‘H’ in Figure 3)
IMPORTANT! Before You Start Mowing
•Check the engine oil.
•Fill the fuel tank with gasoline.
•Check the air pressure of the tires.
•Check the level of the mower housing.
•Make sure the battery cables are attached.
•Make sure the wire is attached to the spark plug.
WARNING: Before doing any assembly or maintenance to the mower, remove the wire from the spark plug.
NOTE: In this instruction book, left and right describe the location of a part with the operator on the seat.
English
9