Panasonic PV-GS250 Using the viewfinder, Power supply, ª Extending the viewfinder

Before using

Using the viewfinder

ªExtending the viewfinder

1Pull out the viewfinder and extend it by pulling the extension knob.

ªLifting up the viewfinder

1Lift it up by pinching the viewfinder extension knob.

ªAdjusting the field of view

1Adjust the focus by sliding the eyepiece corrector knob.

12:30:45PM	12:30:45PM
OCT 15 2005	OCT 15 2005

≥You can adjust the brightness of the viewfinder from the menu.

16

Power supply

ªCharging the battery

When this product is purchased, the battery is not charged. Charge the battery before using this product.

≥Battery charging time (-17-)

≥We recommend using Panasonic batteries.

≥If you use other batteries, we cannot guarantee the quality of this product.

≥If the DC input lead is connected to the AC adaptor, then the battery will not charge.

Remove the DC input lead from the AC adaptor.

1Connect the AC cable to the AC adaptor and the AC jack.

2Put the battery on the battery mount by aligning the mark, and then securely plug it in.

ªCharging lamp

Lights up: Charging

Goes off: Charging completed

Flashing: The battery is over discharged (discharged excessively). In a while, the lamp will light up and normal charging will start.

When the battery temperature is excessively high or low, the [CHARGE] lamp flashes and the charging time will be longer than normal.

LSQT0862