Panasonic PV-GS250 operating instructions Confirmatory indications, Textual indications

( ):

Others

Photoshot picture quality -31-

0:Remaining number of photoshot pictures (When the remaining number of photoshot pictures reaches 0, the red indication

				flashes.)
:				Slide show playback -43-
PictBridge:				PictBridge mode -51-
100-0001:				Folder/File display
No.00:				File number
1:				Number of DPOF Setting -45-
:				Lock setting -45-
		:		[640k480] Image size
	640
			:	[1280k960] Image size
	1280
			:	[1600k1200] Image size
	1600
			:	[2048k1512] Image size
	2048

≥For images not recorded with this Camcorder, the size display is determined as follows according to the number of horizontal pixels.

QXGA				:	2048 or more
				:	1600 or more, less than 2048
UXGA
				:	1280 or more, less than 1600
SXGA
		:			1024 or more, less than 1280
XGA
			:		800 or more, less than 1024
SVGA
	:				640 or more, less than 800
640
					(The size is not displayed at
					under 640 pixels.)

Warning/alarm indications

If any one of the following indications lights up or flashes, please check the Camcorder.

Confirmatory indications

Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted.

No cassette is inserted. [--]/0:

The built-in battery is low. -23-

°: The warning/alarm indication appears when you record yourself. Turn the LCD monitor towards the viewfinder and check the warning/alarm indication.

: No card is inserted.

REMOTE :

An incorrect remote control mode has been selected. -25-

2END:

The tape came to the end during recording. :: The video heads are dirty. -74-

Textual indications

3DEW DETECT/3EJECT TAPE: Condensation has occurred. Take out the cassette and wait for a while. It takes some time until the cassette holder opens, but this is not a malfunction. -73-

LOW BATTERY:

The battery is low. Recharge it. -16-

NO TAPE :

No tape is inserted. -18-

TAPE END:

The tape came to the end during recording.

CHECK REC TAB:

You are attempting to record pictures on a tape with the accidental erasure prevention slider placed in the [SAVE] position.

You are attempting audio dubbing or digital dubbing on a tape with the accidental erasure prevention slider placed in the [SAVE] position.

CHECK REMOTE MODE:

An incorrect remote control mode has been selected. This is only displayed at the first operation of the remote control after powering-on. -25-

WRONG TAPE FORMAT:

You are attempting to play back a tape section that has been recorded with a different TV system. This cassette is incompatible.

UNPLAYABLE CARD:

You are attempting to play back data not compatible with this Camcorder.

67

LSQT0862