Panasonic PV-GS250 Menus related to taking pictures, Menus related to playback, ª H.Shoe Mic

Menu

Menus related to taking pictures

ª[H.SHOE MIC]

Set to [LOWCUT] and this reduces low sound noise and wind noise hitting the stereo zoom microphone (VW-VMH3; optional) mounted on the smart accessory shoe.

ª[DATE/TIME]

This switches between date and time indications. ≥The Camcorder automatically records the date

and time the picture was taken on the tape. ≥You can also show or change the date/time

indication by repeatedly pressing the [DATE/ TIME] button on the remote control.

ª[AUDIO REC]

Switches the audio (PCM audio) recording systems.

[12bit]: Records audio in “12 bit 32 kHz 4 tracks”. (The original audio signals can be kept after the other audio signals are dubbed.)

[16bit]: Records audio in “16 bit 48 kHz 2 tracks”. Audio can be recorded in higher quality. (If audio signals are dubbed, then the original audio signals will be erased.)

ª[REC LAMP]

Set to [ON] and this turns the recording lamp on during recording, which indicates that recording is underway. Set to [OFF] and this does not turn on the lamp even when recording is underway.

ª[DISPLAY]

Set to [ON] and the display mode can be switched to all functions. Set to [OFF] and it can be switched to minimum display.

ª[BEEP SOUND]

Set to [ON] and confirmation/alarm beeps are issued as follows.

1 Beep

≥When you start recording ≥When you turn on the power 2 Beeps

≥When you pause recording 2 Beeps for 4 times

≥When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen.

Menus related to playback

ª[AV JACK]

This switches among the output settings of the AV/headphone terminal.

[IN/OUT]: Use this setting when inputting signals from other equipment via an AV cable or a S-Video cable.

[OUT/Ë]: Automatically switches between AV and headphone output.

[OUT]: Use this setting when image or sound is not output normally to the TV in [OUT/Ë].

≥When using the headphone, set to [SETUP] or [BASIC] >> [AV JACK] >> [OUT/Ë]. If set to [OUT], you may hear noises on the right.

ª[REC DATA]

Set to [ON] and the settings (shutter speed, iris/ gain values, and white balance settings (-38-), etc.) used during the recordings are displayed during playback.

≥When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO], the indication [AUTO] will appear.

≥When there is no data, [---] appears on the display.

≥If the Camcorder data of the Camcorder are played back on other equipment, the settings information is sometimes not displayed normally.

ª[AUDIO OUT]

This switches the sound to be played back. [STEREO]: Stereo sound (main sound and sub

	sound)
[L]:	Left channel sound (main sound)
[R]:	Right channel sound (sub sound)

64

LSQT0862