Panasonic PV-GS250 Printing pictures by directly connecting to the printer PictBridge

Models: PV-GS250

1 90
Download 90 pages 13.79 Kb
Page 51
Image 51
Printing pictures by directly connecting to the printer (PictBridge)

Edit mode

Printing pictures by directly connecting to the printer (PictBridge)

To print pictures by directly connecting the Camcorder to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.)

Insert a card and set to Picture Playback

Mode.

1Connect the Camcorder and the printer with the supplied USB cable.

1

1USB cable

PictBridge

The [PictBridge] indication appears on the screen of the Camcorder.

(When the printer is being recognized, the [PictBridge] indication blinks.)

When no card is inserted in the Camcorder, the [PictBridge] indication does not appear. (You cannot print any pictures.)

When the Camcorder and the printer are not connected properly, the [PictBridge] indication keeps blinking. (It will blink for just over

1 minute.) Connect the cable or check the printer.

We recommend using the AC adaptor as the power supply.

When images are displayed in multi-screen, they cannot be printed.

2Select [SINGLE PRINT] or [DPOF PRINT].

If there is no file with a DPOF setting, you cannot select [DPOF PRINT].

When you select [DPOF PRINT] for printing set the number of prints in DPOF setting.

When [DPOF PRINT] is selected, print after you determine the paper size.

3Move the joystick left and right to select a desired picture, and then press it.

4Select the desired number of prints.

You can set up to 9 prints.

5Select the setting for date printing.

If the printer is not capable of date printing, this setting will be unavailable.

6Select the paper size.

[STANDARD]: Size specific to the printer [4k5 INCH]

[5k7 INCH] [4k6 INCH] [A4]

You cannot set paper sizes not supported on the printer.

7Set [PRINT] >> [YES] to start printing.

ªWhen you stop printing halfway

Move the joystick down.

Avoid the following operations during printing. These operations disable proper printing. Disconnecting the USB cable Removing the card

Switching the mode dial Turning off the power

Check the settings for the paper size, quality of print, etc. on the printer.

You cannot print pictures that cannot be played on the Camcorder.

When the Camcorder and the printer are connected in the Tape Recording/Playback Mode, the [≥Insert a card and set to Picture Playback WEB] or the [1Connect the Camcorder and the printer with the supplied USB cable. WEB] Indication may appear on the LCD monitor. However, pictures cannot be printed.

51

LSQT0862

Page 51
Image 51
Panasonic PV-GS250 Printing pictures by directly connecting to the printer PictBridge, ª When you stop printing halfway