Using the remote control, ª Remote control

Before using

ªIn order to increase the brightness of

the entire LCD monitor

1Press the [POWER LCD] button.

POWER LCD

≥The [POWER LCD] lamp lights up.

≥If the [POWER LCD] button is pressed, the entire LCD monitor will become approx. twice as bright as the normal.

≥Press this button again, and the lamp will go off and the brightness will revert back to the original brightness.

≥This will not affect the images to be recorded.

≥If you turn on the Camcorder when the AC adaptor is used, the [POWER LCD] function will automatically be activated.

ªChanging the picture quality on the

LCD monitor

1Set [SETUP] >> [LCD AI] >> [DYNAMIC] or

[NORMAL].

[DYNAMIC]: The image on the LCD monitor becomes clear and vivid. Optimum contrast and brightness are set depending on the scenes recorded. Clear and brilliant images are presented. (The effect will vary depending on the images recorded.)

[NORMAL]: Switches to the standard picture quality.

≥The effect will vary depending on the scene recorded.

≥The picture quality on the viewfinder will not be affected.

≥This function is automatically set to [DYNAMIC] when the brightness of the LCD monitor is increased (when the [POWER LCD] lamp lights up) and cannot be set to [NORMAL] independently.

≥This will not affect the images to be recorded. ≥When the LCD monitor is rotated by 180°

towards the lens, the picture quality of the LCD monitor is temporarily adjusted as if the [LCD AI] is set to [NORMAL].