Panasonic PV-GS250 operating instructions Magic Wire Remote Control with Narration Mic, Camcorder

Models: PV-GS250

1 90
Download 90 pages 13.79 Kb
Page 26
Image 26
Magic Wire Remote Control with Narration Mic

Before using

Magic Wire Remote Control with Narration Mic

This controller can be used from different high and low angles. It is also handy when a tripod is used. When you do not use the controller, attach the clip to the grip belt. Left-handed users can use this Camcorder more easily.

(1)

(2)

(3)

(4)

(5)

(1)Microphone [MIC]

(2)Recording start/stop button [REC]

(3)Zoom lever [W/T]

(4)Photoshot button [PHOTO SHOT]

(5)Microphone switch button [TALK]

ªConnect the Magic Wire Remote Control with Narration Mic to the

Camcorder

1Plug the Magic Wire Remote Control with Narration Mic into the [REMOTE] terminal as far as it goes.

REMOTE/MIC

ªSwitching the microphone

Press the [TALK] button on the Magic Wire Remote Control with Narration Mic, and the microphone on the remote control will be activated instead of that on the Camcorder.

While this button is being pressed, [(1)Microphone [MIC] ] appears and the microphone on the remote control is activated.

We recommend you talk with the microphone approx. 4 inches (10 cm) away from your mouth.

ªAbout the clip (on the backside)

When you move with the clip fitted to your pocket or elsewhere, beware of knocking over the tripod or causing the Camcorder to fall off the table.

The [PHOTO SHOT] button on the Magic Wire Remote Control with Narration Mic cannot be pressed halfway.

If the pin plug of the control is not inserted

securely into the [REMOTE] terminal as far as it will go, normal operation may not be ensured.

Before using, make sure that the plug is inserted securely into the terminal as far as it will go.

26

LSQT0862

Page 26
Image 26
Panasonic PV-GS250 Magic Wire Remote Control with Narration Mic, Camcorder, ª Switching the microphone