140
Network
7
7 Network
WPS (PBC)
One Foot Connection
zThe product may not recognize the Samsung Wireless LAN adapter if you connect it to the
product with a USB hub or USB extension cable other than the cable supplied with the product.

7.1.4 Wireless Network Setting

Automatic Network Setup

Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Security Key. The Security Key is based on
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to
enter when you set up security for your wireless network. If you use this method of setting up the network
connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase
during the the automatic or manual setup process.
How to set up automatically
1Go to the Network Settings screen.
2Select Wireless (General), press [ ], and then press [ ] again.
3The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
4In the list of networks, press the or button to select a network, and then press the [ ] button
twice.
If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the
correct Network Name (SSID) and Security key to establish the connection.
5If the Enter security key screen appears, go to step 6. If you select a wireless router that does not
have security, go to step 8.
6If the router has security, enter the Security key (Security key or PIN).
zWhen you enter the Security key (Security key or PIN), use /// buttons on your
remote to select number/ characters. Press the [ ] button to enter the characters.
zYou can also enter numbers by pressing the number buttons on your remote.
7When done, use the right arrow button to move the cursor to Next, and then press [ ].
8The network connection screen appears and the verification process starts. When the connection
has been verified, the “Internet is connected successfully.” message appears.
zIf the network does not accept the Security key (Security key or PIN), select Retry or select
IP Settings to enter the settings manually.
zIf you want to set up the connection manually, select IP Settings. Then, go to the next
section, “How to set up manually”.