149
System
8
8 System

8.3 Time

MENU [] System Time ENTER
[ ]
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off
at a specified time using the Timer function.

8.3.1 Clock

Set the clock to use the various various timer features of the product.

Changing the Setting for Clock

zClock Mode
Set the current time manually or automatically.
Auto: Have the product set the current time automatically using the time from a digital channel.
You must have the cable or an antenna connected to the product to set the time
automatically.
Manual: Set the current time manually.
Depending on the broadcast station and signal, the auto time set up may not be correct. In
this case, set the time manually.
zClock Set
Set the Date and Time.
Select
Clock Set
. Select
Date
or
Time
, and then press [ ]. Use the number buttons to enter numbers
or press the up and down arrow buttons. Use the left and right arrow buttons to move from one entry
field to the next. Press [ ] when done. To exit
Clock Set
, select
Close
, and then press [ ].
Available only when Clock Mode is set to Manual.
You can set the Date and Time directly by pressing the number buttons on the remote
control.
zTime Zone
Select your time zone.
This function is only available when the Clock Mode is set to Auto.
zDST (Off / On)
Switches the DST (Daylight Saving Time) function on or off.
This function is only available when the Clock Mode is set to Auto.
m