137
Network
7
7 Network
Automatic Network Settings
Use the Automatic Network Settings when connecting your product to a network that supports DHCP.
To set up your product cable network connection automatically, follow these steps.
How to set up automatically
1Go to the Network Settings screen.
2Select Wired, press [ ], and then press [ ] again.
3The network test screen appears and verifies the network connection. When the connection has
been verified, the “Internet is connected successfully.” message appears.
zIf the connection process fails, check the LAN port connection.
zIf the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, Manual Network Setup.
Manual Network Settings
Use the Manual Network Settings when connecting your product to a network that requires a Static IP
address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1Right click the Network icon on the bottom right of the screen.
2In the pop-up menu that appears, click "Status".
3On the dialog that appears, click the "Support" tab.
4On the "Support" Tab, click the Details button. The Network connection values are displayed.
How to set up manually
To set up your product cable network connection manually, follow these steps.
1Go to the Network Settings screen.
2Select Wired, press [ ], and then press [ ] again. The network test screen appears and the
verification process starts.
3Press [ ]. The verification process stops. Select IP Settings on network connection screen. The
IP Settings screen appears.
4Select the field at the top, press [ ], and then set IP Mode to Manual.
5Press the button on your remote to go to the IP Address entry field, and then press [ ].
6Enter the first portion of the IP Address (for example, 105) into the first entry field using the number
keys on your remote. Press the right arrow button to go to the next field.
7Enter the next portion of the IP Address. Press the right arrow button to go to the next field.
8Repeat the entry process for each field in the IP Address.