166
System
8
8 System
8.12 Source AutoSwitch Settings
MENU [] System Source AutoSwitch Settings ENTER
[ ]
Turning on the display with Source AutoSwitch On, and the previous video source selection is not
active, the display will automatically search the different video input sources for active video.
zSource AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched for
active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two
searches for an active source, each search checking the primary and then secondary source. If both
searches fail, the display will return to the first video source and display a message indicating that
there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs
twice in sequence looking for an active video source, returning back to the first video source in the
sequence if no video is found.
zPrimary Source
Specify Primary Source for the automatic input source.
zSecondary Source
Specify Secondary Source for the automatic input source.
The displayed image may differ depending on the model.
m