121
Media
6
6 Media
6.2.2 Antenna
MENU [] Media Channel Antenna ENTER
[ ]
Your TV memorizes channels and adds the memorized channels to the Channel. Before your TV can
memorize channels, you must specify the signal source, either Air or Cable. If you select cable, when
you start Auto Program, you must also specify the cable system type, STD, HRC, or IRC. If you don’t
know your cable system type, contact your local cable company for the information. Most cable
companies use STD.
zAir / Cable
6.2.3 Auto Program
MENU [] Media Channel Auto Program ENTER
[ ]
Scans for channels automatically and stores them in the TV’s memory.
1Select Air or Cable or both by highlighting and then pressing [ ].
If you selected Air or Cable or both on the Antenna screen, your choice will already be selected.
2Select Next, and then press [ ].
3If you selected Cable, the Cable System screen appears. Select Digital, and then press [ ].
If you selected Antenna only, Auto Program starts.
4Select STD, HRC, or IRC, and then press [ ].
5Repeat for Analog.
6Select Next, and then press [ ]. Auto Program starts.
After all the available channels are stored, Auto Program removes scrambled channels. When
done, the Auto Program menu then reappears. This process can take up to 30 minutes.
m
m