Lanier LP 036c operating instructions Installing Software

Operating Instructions Client Reference

92

DConfirm that “Internet Protocol (TCP/IP)” is selected in the [Components checked are used by this connection:] box on the [General] tab.

Note

❒If the check box for TCP/IP protocol is not selected, select the box.

❒If the TCP/IP protocol is not installed, click [Install...] on the [General] tab and install it. For more information about installing the TCP/IP protocol, see Windows XP Help.

EConfigure the TCP/IP protocols with the appropriate IP address, subnet mask and other settings. Confirm that the settings are correct with the network administrator.

Installing Software

Preparation

If you are not using the print server, install SmartNetMonitor for Client, and then install the printer driver by selecting "SmartNetMonitor for Client". This enables peer-to-peer network printing with the TCP/IP, NetBEUI, or IPP protocol.

Installing SmartNetMonitor for Client

A Close all applications that are running.

B Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

Note

❒Auto Run might not automatically work with certain OS settings. In this case, launch "Setup.exe" located on the CD-ROM root directory.