Lanier LP 036c operating instructions 142, When connecting with a parallel cable

Operating Instructions Client Reference

142

Note

❒The RPCS printer driver supports bidirectional transmission and updates the printer status automat- ically.

❒The PCL 5c printer driver supports bidirectional transmission, you can update the printer status manually.

❒The PostScript 3 printer driver does not support bidirectional transmission.

To support bidirectional transmission, the following conditions are required:

❖When connecting with a parallel cable

•The computer must support bidirectional transmission.

•The printer must be set to bidirectional transmission.

•The Interface cable must support bidirectional transmission.

•The machine must be connected to the computer using the standard parallel cable and parallel connector.

•Under Windows NT 4.0, [Enable bidirectional support] must be selected and [Enable printer pool- ing] must not be selected on the [port] tab with RPCS printer driver.

❖When connecting with the network

•The printer must be set to bidirectional transmission.

•SmartNetMonitor for Client included on the CD-ROM must be installed, and the TCP/IP proto- col must be used.

•Under Windows NT 4.0, [Enable bidirectional support] must be selected and [Enable printer pool- ing] must not be selected on the [port] tab with RPCS printer driver.

•Under Windows NT4.0, specified IP address in the Microsoft TCP/IP print is used.