Lanier LP 036c operating instructions Making default printer settings Default Document Properties

Operating Instructions Client Reference

214

-If a message is displayed during installation of the printer driver

When there is a driver in the computer that is newer than the one currently being installed, a message dialog box appears.

In such a case, you cannot install with the Auto Run program. Use the driver that was used in installing the driver that is displayed in the message, and reinstall with [Add Printer].

AClick [Start], point to [Settings], and then click [Printers].

BDouble-click the [Add Printer] icon.

CFollow the wizard to install the driver.

If the printer driver disk is a CD-ROM, the sources of installation are as follows. If the installer starts up, click [Cancel] to quit it.

•PostScript 3

DRIVERS\PS\NT4\(Language)\DISK1

Making default printer settings - Default Document Properties

Limitation

❒To change the printer settings requires Full Control access permission. Members of the Administra- tors, Server Operators, Print Operators, and Power Users groups have Full Control permission by default. When you set up options, log on using an account that has Full Control permission.

A Click [Start] on the taskbar, point to [Settings], and then click [Printers].

The [Printers] window appears.

B Click to select the icon of the printer you want to use.