Lanier LP 036c operating instructions Printing without Using a Print Server, 122

Operating Instructions Client Reference

122

Printing without Using a Print Server

Preparation

To use a printer connected to the Ethernet interface, select "SmartNetMonitor" or "LPR Port" when installing the printer driver.

•SmartNetMonitor

See p.122 “Configuring the Protocols” and p.126 “Installing Software” and p.127 “Installing the PCL 5c or RPCS Printer Driver” or p.132 “Installing the PostScript Printer Driver”.

•LPR Port

See p.122 “Configuring the Protocols” and p.127 “Installing the PCL 5c or RPCS Printer Driver” or p.132 “Installing the PostScript Printer Driver”.

Note

❒If you want to use “LPR Port”, "Microsoft TCP/ IP Printing" must be installed.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing

Follow these instructions to configure the printer and Windows NT 4.0 to use the TCP/IP protocol and IPP.

❖Configuring the printer

Configure the printer to use the TCP/IP protocol.

•Confirm that the TCP/IP protocol is set to be active. (The factory default is active.)

•Assign an IP address and make other settings required for using the TCP/IP protocol.