Lantronix 900-332 manual Enter or modify the following fields, Ad Hoc Settings

Configuration Using Web-Manager

Figure 4-10. WLAN Settings

2. Enter or modify the following fields:

Network Interface	Use the pull down menu to select a WLAN interface or an
	Ethernet interface.
Network Name	Enter the name of the network where the WiPort is located.

Ad Hoc Settings

Ad Hoc Network	Select the checkbox when using a client (such as a wireless
Creation	card) to communicate with the WiPort instead of an Access
	Point.
Ad Hoc Network Name	Enter the network name for the Ad Hoc network.
Ad Hoc Network	Select from the pull down menu the radio channel for the Ad
Channel	Hoc network. The default value is 11.
Ad Hoc Country	From the pull down menu, select a country for the Ad Hoc
	network. The default is United States.

Wireless Network Security

Security	As an additional security measure, enable WEP on the
	WiPort. By default, WEP is disabled on WiPort.
Authentication	Select an authentication scheme (None or Shared) from the
	drop down menu.
Encryption	Select the encryption type from the pull down menu. 128 bits
	is the default encryption.

WiPort™ User Guide 4-15