Lantronix 900-332 manual General DeviceInstaller Settings, Device Server message

	General DeviceInstaller Settings
Problem/Message	Reason	Solution
	The Telnet configuration port	of the device server).
	(9999) is disabled within the
	device server security settings.	PING X.X.X.X (X.X.X.X is the IP
		of the device server).
		If you get a response, then there
		is a duplicate IP address on the
		network. If you do not get a
		response, use the serial port to
		verify that Telnet is not disabled.
The device server appears to	If you are sure that the serial port	You can check to see whether
be set up correctly, but you are	setting is correct, then you may	there is a socket connection to or
not communicating with your	not be connecting to the correct	from the device server by
device attached to the device	socket of the device server.	checking the state of CP1, if it has
server across the network.		been configured for LED1
	Another possibility is that the	functionality.
	device server is not set up	If the state of CP1 is blinking
	correctly to make a good socket
	connection to the network.	consistently, or is completely off,
		then there is a good socket
		connection.
		If the state of CP1 is low, use the
		Connect Mode option C0 for
		making a connection to the device
		server from the network. Use
		Connect Mode option C1 or C5
		for a connection to the network
		from the device server. See the
		full list of Connect Mode options
		in Connect Mode on page 5-7.
When connecting to the Web-	Your computer is not able to	Make sure that port 30718
Manager within the device	connect to port 30718 (77FEh)	(77FEh) is not blocked with any
server, the No Connection With	on the device server.	router that you are using on the
The Device Server message		network. Also, make sure that port
displays.		77FEh is not disabled within the
		Security settings of the device
		server.

WiPort™ User Guide 9-3