Lantronix 900-332 manual Active Connection

Configuration Using DeviceInstaller

Port Password

This parameter appears only when Password Required is set to True. Enter a password for the selected channel or serial port.

Active Connection

Active Connection	Defines the unit’s connection method. The default is None
	(no Active Connection).
Terminal Type	This field is available for configuration only when Telnet Mode
	to True.
	Use the terminal name for the Telnet terminal type. Enter only
	one name. When this option is enabled, the unit also reacts to
	the EOR (end of record) and binary options, which can be
	used for applications such as terminal emulation to UNIX
	hosts.
Remote Port	This field is available for configuration only when Active
	Connection is not set to None.
	Set the remote TCP port number for the unit to make outgoing
	connections. This parameter defines the port number on the
	target host to which a connection is attempted.
	To connect an ASCII terminal to a host using the unit for login
	purposes, use the remote port number 23 (Internet standard
	port number for Telnet services).
Use Host List	This field is available for configuration only when Active
	Connection is not set to None.
	If this option is set to True, the device server attempts a
	connection from the host list. This process stops at the first
	valid connection.
	The host list is disabled for Manual or Modem Mode. The unit
	will not accept a data connection from an incoming remote
	device when the host list option is enabled.
	For information on configuring the host list, see Host List
	Configuration on page 3-3.
Modem Emulation Mode	In Modem (Emulation) Mode, the unit presents a modem
	interface to the attached serial device. It accepts AT-style
	modem commands, and handles the modem signals
	accordingly.
	For more information on Modem Emulation Mode, see Modem
	Mode on page 5-11.
	Selecting Without Echo tells the modem not send an answer
	to the commands received (or display typed data).
	Choose Full Verbose for the unit to echo modem commands
	and respond to a command with a message string.
	Character Response tells the WiPort unit to echo modem
	commands and respond to a command with a single character
	response.
Telnet Mode	This field is available for configuration only when Active
	Connection is not set to None. Select True to permit a Telnet
	connection to the WiPort unit.
Remote Host	This field is available for configuration only when Active
	Connection is not set to None.
	Denotes the destination IP address used with an outgoing
	connection.

3-6 WiPort™ User Guide