Configuration Using Web-Manager

Remote Port

Enter the port number of the remote device.

 

 

Remote Host

Enter the IP address of the remote device.

 

 

Change Address Table

Field enabled when Datagram Type is set to FD. Enter values

 

between 1-255 to identify units on the local network of device

 

servers.

 

 

Email Configuration

The unit sends an Email to multiple recipients when a specific trigger event occurs. There are three separate triggers, based on any combination of the configurable pins when selected as user I/O functions. Optionally, use a two-byte serial string to initiate a trigger. Each trigger is independent of the others. Each condition within an individual trigger must be met before the unit will send the Email.

To configure the WiPort’s email settings:

1.From the main menu, select Email to open the Email Settings window.

Figure 4-8. Email Settings

2. Configure the following fields:

Mail Server IP Address

Enter the IP address of the mail server.

 

 

Domain Name

Enter the Email server’s domain name.

 

 

Unit Name

Enter the username used by the WiPort to send Email

 

messages.

 

 

4-12

WiPort™ User Guide

Page 36
Image 36
Lantronix 900-332 manual Configure the following fields, Change Address Table, Mail Server IP Address