Lantronix 900-332 manual Available fields, enter the following information, Channel, Port Settings

Configuration Using Web-Manager

Figure 4-5. Channel Serial Settings

2. In the available fields, enter the following information:

Channel 1

Disable Serial Port

Available on Channel 1 settings only. When selected, disables communication through the serial port.

Port Settings

Protocol	Select the protocol type from the pull down menu for the
	selected channel.
Flow Control	Flow control manages data flow between devices in a network
	to ensure it is processed efficiently. Too much data arriving
	before a device is prepared to manage it causes lost or
	retransmitted data.
Baud Rate	The unit and attached serial device, such as a modem, must
	agree on a speed or baud rate to use for the serial connection.
	Valid baud rates are 300, 600, 1200, 2400, 4800, 9600
	(default), 19200, 38400, 57600, 115200, 230400, 460800, or
	921600.
Data Bits	Indicates the number of bits in a transmitted data package.
Parity	Checks for the parity bit. The default is None.
Stop Bits	The stop bit follows the data and parity bits in serial
	communication. It indicates the end of transmission.

WiPort™ User Guide 4-7