Configuration Using Web-Manager

Figure 4-2. Network Settings

Automatic IP Address Configuration

To automatically assign an IP address and its network configuration:

1.Click Network from the main menu.

2.Select Obtain IP address automatically.

3.Enter the following (as necessary):

Disable BOOTP

Leave the checkbox empty to enable Bootstrap Protocol

 

(BOOTP). The BOOTP server automatically assigns the IP

 

address from a pool of addresses.

 

 

Disable DHCP

Leave the checkbox empty to enable Dynamic Host

 

Configuration Protocol (DHCP). DHCP automatically assigns

 

a leased IP address to the WiPort unit.

 

 

Disable Auto-IP

The WiPort generates an IP in the 169.254.x.x address range

 

with a Class B subnet. Select the checkbox to disable this

 

feature.

 

 

Host Name

Enter the name of the host on the network.

 

 

Note: Disabling BOOTP, DHCP, and Auto-IP (i.e. all three checkboxes) is not advised as the only available IP assignment method will then be ARP or serial port.

4. Click the OK button when finished.

Static IP Address Configuration

To manually assign an IP address and its network configuration:

WiPort™ User Guide

4-3

Page 27
Image 27
Lantronix 900-332 Automatic IP Address Configuration, Static IP Address Configuration, Enter the following as necessary