3: Configuration using DeviceInstaller

This chapter covers the steps for getting the WiPort device server online and working. This chapter includes the following topics:

Topic

Page

Accessing WiPort using DeviceInstaller

3-1

 

 

Server Configuration

3-1

 

 

WLAN Configuration

3-2

 

 

Host List Configuration

3-3

 

 

OEM Pin Configuration

3-3

 

 

Channel 1 and Channel 2 Configuration

3-4

 

 

Email Configuration

3-8

 

 

Accessing WiPort using DeviceInstaller

Note: Make note of the MAC address. It is needed to locate the WiPort using DeviceInstaller. For more information on the hardware address, see Hardware Address on page 2-3.

Follow the instructions on the product CD to install and run DeviceInstaller.

1.Click StartÆPrograms Æ LantronixÆDeviceInstallerÆDeviceInstaller. If the PC has more than one network adapter, a message displays requesting the selection of a network adapter. Select an adapter and click OK.

2.Click the Search icon and select the WiPort unit from the list of Lantronix device servers on the local network.

3.Highlight the WiPort device in the list and click Settings. The Configure Device window for the WiPort unit displays.

4.To store configuration changes, click OK. To store and apply modifications, click Apply.

Server Configuration

Note: The IP address is assigned via DHCP (on DHCP-enabled networks).

Assign a static IP address only if necessary.

To manually assign an IP Address:

1.Click the Assign IP icon .

2.If prompted, enter the hardware address (on the product label) and click Next.

WiPort™ User Guide

3-1

Page 15
Image 15
Lantronix 900-332 manual Configuration using DeviceInstaller, Accessing WiPort using DeviceInstaller, Server Configuration